How to Apply DTF Transfers

🔥 Standard Settings:

  • Temp: 300°F
  • Time: 10 seconds
  • Pressure: Heavy (7/10)

🧵 Step-by-Step Instructions:

  1. Pre-press your garment: Remove moisture and wrinkles by pre-pressing for 5 seconds.
  2. Apply your transfer: Place the design face up on the garment. Press for 10 seconds at 300°F with heavy pressure.
  3. Peel it your way:
    • Hot or cold peel: Works either way!
    • Polyester: Let cool for 5–10 seconds before peeling.
  4. Having issues sticking? If parts of the transfer don’t stick, just repress using firm pressure for another 10 seconds.
  5. 2nd press = long-lasting results: Cover with a Teflon or parchment sheet and press again for 5 seconds at 300°F.

✨ Special Notes:

  • Polyester garments: Lower temp to 275°F–280°F and monitor closely.
  • Glitter film: Cold peel only — let it cool before removing the film.